Skip to content
TMA Power Systems
Laser cutter head cutting sheet metal, with sparks over the slat bed

Shop

Cutting, bending, welding, and paint.

TMA Power Systems is a division and brand of TMA Fabrication Services LLC, the main legal business. Laser cutting, bending, welding, and painting are done in that shop.

Laser cutter head cutting sheet metal, with sparks over the slat bed
Laser cutting
Racks of steel tube, angle, and bar stock in a metal supply yard
Steel for frames and formed parts
Welder joining a sheet-metal corner in a fabrication shop
Welding
Painter in a spray booth applying coating to a fabricated metal assembly
Painting and powder coat

Laser cutting

Flat patterns for doors, wraps, brackets, and panels are cut from the approved drawing so holes and profiles match the job.

Bending

Press-brake forming turns those blanks into cabinet bodies, covers, troughs, and formed stiffeners.

Welding

Seams, frames, studs, and pads are welded to the drawing. Weld process and inspection level are whatever the job specifies.

Painting

Finish is paint or powder coat in the color the quote calls out, or mill finish when the spec leaves the metal bare.

From print to crate

  1. The quote is checked against the drawing: material, bends, weld access, hardware, gasket path, and finish.
  2. Flat parts are cut, then formed.
  3. Seams, frames, and studs are welded to the print.
  4. Hardware, panels, and any quoted accessories go on.
  5. The finish is applied, or the metal ships mill finish when that is what the spec says.
  6. The job is looked over against the drawing before it leaves.

Equipment

Needs confirmationNo machine list is published on this site. The sister shop describes its own equipment at tmafabrication.com. Add a list in the content file only if it should be repeated here.

Send the print with the process in mind.

If a bend, a weld, or a finish is unusual, say so in the quote notes.

Request a Quote