Skip to content
TMA Power Systems

Materials

The metal follows the specification.

Alloy, thickness, and finish are quote inputs. If the drawing is silent, we ask before we assume.

Materials used for custom enclosures and power equipment
MaterialWhere it shows up
AluminumA common choice for outdoor cabinets when weight and corrosion both matter. Alloy and thickness come from the drawing or the quote.
Carbon steelHot-rolled or cold-rolled sheet and plate for indoor cabinets, frames, and general fabrication. Usually painted.
Galvanized steelUsed where the spec wants a zinc coating, including some outdoor boxes and strut-style work. Weld touch-up has to be called out.
Stainless steel304 and 316 are the grades buyers usually name. 316 is the request when the site is coastal or chemically aggressive. Confirm the grade on the quote.
CopperBus and ground bars. The electrical specification has to state alloy, temper, and plating.

Finishes

Powder coat

The usual painted finish for cabinets and frames. Send the color by a RAL, ANSI, or Federal Standard number if the spec has one. A color name alone is a guess.

Wet paint

Quoted when the specification calls for liquid paint instead of powder.

Mill or plated

Bare aluminum, stainless, galvanized, or plated copper when the drawing says not to paint.

Send the drawing. Get a quote.

A color number beats a color name. Put it in the finish field.

Request a Quote